Fast Framing 5-1/2-in 18 -Tooth Rough Finish Tungsten carbide-tipped Saw Blade

Diameter: 5-1/2-in

Arbor Diameter: 5/8-in 

Number of Teeth: 18

Item Weight: N/A 

Package Quantity: 1

Material: Tungsten carbide tipped steel

For Use On: Plastic, Wood, Vinyl, Plywood, Acrylic, Composite Decking

Cut Capability: Dry cut only

Spyder Tarantula™ Rip and crosscut with ease with Spyder Framing circular saw blades. NiCo teeth are sharpened 3x to provide clean cuts and exceptionally long life. Track straight with reduced friction, heat and noise - the Carbide-tipped circular saw blade is the professionals choice for framing and construction. Framing and construction blade is for use in new wood materials. Up to 6x the life of standard carbide blades.

WARNINGS

To reduce the risk of injury: Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

WARNING: Operating the tool without wearing proper eye protection may result in serious injury.

Before each use, check that the blade is clean, sharp and free from cracks, loose teeth, missing teeth, broken teeth, and any other damage: Do not use a dirty, dull, or damaged blade as this may result in blade pinching, binding or stalling, kickback and loss of control. These situations can cause the saw to jump back at the operator and result in a serious injury. Carbide is a hard, but brittle material. Foreign objects in the workpiece such as wire or nails can cause the carbide tips to crack or break. Overheating a saw blade can cause it to warp and result in kickback. Buildup of sap on the blades, insufficient blade set, dullness, and unguided cuts, can all cause an overheated blade and kickback.

To reduce the risk of injury: Never operate the power tool without proper safety guards in place.

Use personal protective equipment. Always wear eye protection: Protective equipment such as a dust mask, non-skid safety shoes, hard hat and hearing protection should be used in appropriate conditions to reduce the risk of personal injury.

To reduce the risk of explosion, electric shock, and property damage: Always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind cuts.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool: Blades that do not match the mounting hardware of the power tool will run eccentrically, causing loss of control, increasing the risk of personal injury. Make sure the speed marked on the blade is at least as high as the no-load RPM marked on the power tool. To assure proper rotation direction of the saw blade, the arrow direction on the blade must correspond with the arrow direction on the saw. Mount blade properly with the correct blade washers and bolt for the power tool.