- 8% cobalt bi-metal blades with 6 TPI on one side and 10 TPI on the other cut the toughest wood materials
- Cost effective double-edged blades — 2 blades in 1
- Double-edged blade cuts both ways and plunge cuts
3X3™ Double-Sided 6" Wood/Metal Cutting 6/10-TPI Reciprocating Saw Blade
Tool Type: Reciprocating Saw
Blade Length: 6-in
Package Quantity: 1
Material: Cobalt Bi-metal steel
For Use On: Wood, Nail Embedded Wood, Steel/Metal, Non-Ferrous Metal, Plastic/PVC, Acrylic, Plywood, MDF
Spyder Mach-Blue™ coated reciprocating saw blades feature 8% cobalt bi-metal construction for increased durability in tough applications. Super hard Mach-Blue™ plating retains sharper cutting edges, and reduces heat build-up and cutting friction - yielding up to 20x more cuts than conventional bi-metal blades. At a fraction of the price, these Mach-Blue™ blades represent an extreme value when compared to drastically more expensive carbide tipped reciprocating saw blades. Spyder Mach-Blue™ coated reciprocating saw blades are made in Germany.
WARNINGS
To reduce the risk of injury: Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.
WARNING: Operating the tool without wearing proper protection may result in serious injury. Reciprocating blades can cause lacerations and puncture wounds.
Before each use: Make sure the blade is unbent and check the blade for wear, cracks, and other damage. Do not use an excessively worn or damaged blade as this can cause blade binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury.
Use personal protective equipment. Always wear eye protection: Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury.
To reduce the risk of explosion, electric shock, and property damage: Always check the work area for hidden gas pipes, electrical wires, and water pipes before making blind and/or plunge cuts.
To reduce the risk of injury:Use the proper blade for your material. Only cut materials that are listed on the product label.
